KLD Machinery

The company respected "pragmatic, hard work, responsibility," the entrepreneurial spirit, and integrity, and win-win, and create business philosophy, and create a good business environment to new management models, improve technology and good service, excellent quality for survival , We always adhere to the user first intention to serve customers, insist on using their services to impress customers.

The main equipment of adsorption Loop of carbon Propeller-ac

2020-09-16 09:14

Introduction：The main equipment of adsorption Loop of carbon Propeller-activated carbon Transportation The activated carbon should be scrubbed in a mechanical agitating tank before adding the adsorption loop of the propeller to grind the edges and shar

The main equipment of adsorption Loop of carbon Propeller-activated carbon Transportation

The activated carbon should be scrubbed in a mechanical agitating tank before adding the adsorption loop of the propeller to grind the edges and sharp angles of the activated carbon. The scrubbed activated carbon was sifted to remove the broken fine carbon, and only the granular carbon with qualified particle size was added to the last adsorption tank in the adsorption loop of the propeller.

The transportation of activated carbon from the latter tank to the next depends mainly on the scale of production and economic factors. When the production capacity is very small, the carbon can be transported manually, but the intensity of labor is high and the loss of carbon is easy to be caused. Therefore, at present, carbon propeller mainly uses air lift to transport carbon.
In modern carbon in leaching plant, hydraulic injector is used to transport carbon, and the curved pipe with large curvature radius is used to reduce the pipe fittings and valves in the pipeline as far as possible, so as to reduce the wear and tear of carbon in the conveying process. In addition, the use of egg-shaped acid-lift principle of the transfer or blowing device to transport carbon. When the activated carbon is in the state of wetting and sinking, the amount of water transported can be reduced, and the wear of carbon is the least,diaphragm pumps are commonly used for transport of spills carbon in storage tanks.

上一篇：The main equipment of the adsorption circuit of the carbon p

下一篇：Chemical treatment of Refractory Copper Ore－summary

< Back to list